Burst Pipe Repair in Portland, OR — 24/7
Water pouring in? Shut off your main valve and call. A Portland plumber is dispatched within about 60 minutes, stops the leak, and repairs it on the first visit in most cases — no overtime fees, and we document everything for your insurance.
- Arrival Window Confirmed
- Same-visit fix in most cases
- Insurance documentation
- No after-hours fee
Before arranging repairs
If safe and you know how, close the property’s water shutoff. Stay out of water near electrical equipment. Do not enter a flooded crawl space or touch a wet electrical panel.
Burst pipe emergency — we stop the damage now
- Emergency dispatch — call answered immediately
- Flat-rate quote before any work starts
- Discuss the repair scope before work
- Live dispatcher 24/7 — no hold music
Burst pipe? What to do while we're on the way
- Shut off the main water valve. Garage, basement, crawlspace, or near the street meter — turn clockwise.
- Open faucets to drain the lines. Relieves pressure and clears remaining water.
- Cut power if water is near electrical. Switch off the breaker for any flooded area.
- Move valuables and contain the water. Towels, buckets, and a wet/dry vac limit damage.
- Call us and photograph the damage. We dispatch a plumber; photos help your claim.
What we do when we arrive
Isolate and stop the leak, locate the exact failure point — including behind walls and under slabs with electronic leak detection — and repair or replace the burst section the same visit. We protect freeze-prone runs and document the damage for your claim.
Need cleanup too? We coordinate water extraction and drying.
Signs a pipe burst behind a wall
- Rushing or hissing water sound inside a wall
- Water stains, bubbling paint, or sagging drywall
- A sudden spike in your water bill
- Low water pressure or no water at all
- A musty smell or mold appearing
- Warm spots on the floor (hot-water slab leak)
Common causes in Portland
Most bursts trace back to freezing during a cold snap, high water pressure or a failed PRV, corrosion in aging galvanized pipe, water hammer, or ground movement. Portland's older homes often still have galvanized steel or polybutylene pipe near end of life.
Frozen pipe to blame? See frozen pipe repair.
Burst pipe repair cost in Portland
You always get a flat-rate quote before we start. As a guide:
| Accessible / exposed pipe repair | $300 – $800 |
| Behind-wall repair (excl. drywall) | $400 – $1,200 |
| Under-slab / under-concrete | $1,000 – $4,500 |
| After-hours emergency call-out | $0 surcharge |
Estimates for guidance; your price depends on pipe location, material and any water damage. Financing on larger repairs.
Related: pipe repair & repiping · water line repair · slab leak repair
Pipe burst? Call now — every minute counts.
Shut off your water main, then call. A Portland plumber is dispatched within the hour, 24/7, no overtime fees.
Local help for Burst Pipe Repair
From the first call to a clean finish, our Portland plumbers handle burst pipe repair with upfront, flat-rate pricing and no overtime fees — day, night, weekends and holidays.
Call (971) 367-8197Burst pipe repair FAQ
Active leak? Shut off your water main, then call 24/7.
What should I do the moment a pipe bursts?
Shut off the main water valve, open faucets to drain the lines, cut power if water is near electrical, move valuables and contain the water, then call us and photograph the damage for insurance. We'll guide you on the phone.
Do you offer 24/7 emergency burst pipe repair in Portland?
Yes. We answer live any hour and dispatch a plumber the same hour — typically within ~60 minutes across the metro, nights, weekends and holidays, with no overtime fees.
How much does burst pipe repair cost in Portland?
The price depends on diagnosis, access, parts and the agreed work. Ask what is included in the assessment and request the repair scope and price before authorizing work. Additional restoration or specialist work should be identified separately.
Do you charge extra for nights, weekends, or holidays?
Ask about the assessment charge, any after-hours fee and the proposed repair price when arranging the visit. Confirm the terms before authorizing work.
Does homeowners insurance cover a burst pipe?
Coverage depends on the policy, the cause of the damage and the insurer’s assessment. Ask your insurer about coverage, exclusions and the documentation it needs before assuming that any repair or restoration will be covered.
How do I know if a pipe burst inside my wall?
A rushing or hissing sound in the wall, water stains or bubbling paint, a water-bill spike, low pressure, or a musty smell. We locate it with electronic leak detection.
What causes pipes to burst in Portland?
Freezing during cold snaps, high pressure or a failed PRV, corrosion in aging galvanized pipe, water hammer, and ground movement. See frozen pipe repair.
Which pipe materials can you repair?
Copper, PEX, galvanized steel, PVC, CPVC and polybutylene. We repair the failed section and can recommend repiping if the pipe is at end of life.
Other Plumbing Services in Portland
One call covers every plumbing need, anywhere in the metro.
Water Heater Repair
No hot water or a leaking tank? Same-day gas, electric & tankless repair.
Water Heater Replacement
Old or failed unit swapped same day, hauled away and code-compliant.
Water Heater Installation
New tank or tankless installs sized right for your home.
Tankless Water Heater Repair
Flow-sensor, ignition, scale and control-board fixes.
Drain Cleaning
Clogged or slow drains cleared fast — no harsh chemicals.
Hydro Jetting
High-pressure cleaning that blasts grease, roots and scale.
Sewer Line Repair
Camera diagnosis and trenchless repair of damaged laterals.
Sewer Line Cleaning
Roots and blockages cleared from your main sewer line.
Sewer Line Replacement
Trenchless pipe bursting or a targeted dig that lasts decades.
Sewer Camera Inspection
HD camera locates the exact problem underground.
Leak Detection
Non-invasive location of hidden water leaks before they spread.
Slab Leak Repair
Pinpoint and repair leaks under your concrete slab.
Pipe Repair & Repiping
Repair or repipe for copper, PEX and old galvanized lines.
Gas Line Repair
Safe repair and leak-testing of natural-gas and propane lines.
Water Line Repair
Repair leaking or broken main water-service lines.
Frozen Pipe Repair
Thaw and repair frozen, split pipes before they flood.
Faucet Repair
Drips, low water pressure and worn cartridges fixed fast.
Toilet Repair
Clogged, running, leaking and overflowing toilets repaired.
Garbage Disposal Repair
Jammed, humming or leaking disposals repaired or replaced.
Backflow Testing
Backflow testing requirements, scheduling and reports.
Commercial Plumbing
Same-day plumbing for restaurants, offices and retail.
How the repair scope is decided
Diagnosis identifies whether the failed line carries pressurized water or drainage, where it can be isolated, and how the damaged section can be reached. Adjacent pipe and fittings are checked before a repair is selected.
A local failure may need a replacement section and compatible fittings. Repeated failures, widespread corrosion or damaged inaccessible runs may call for a larger repair scope. The repair should be checked for leaks before access openings are closed.
Confirm what the plumbing quote includes and whether drying, cleanup or wall repairs require a separate contractor. Stopping the leak does not by itself dry hidden building materials.
What to have ready before a visit
Describe where water is entering the room, whether the supply is off, and whether there is ceiling, crawl-space or electrical involvement. Photos taken from a dry, safe position can help explain the access needed.